2. 国際会議プロシーディングス

Yuki Sakai and Takahiro MATSUI, INDICES REPRESENTING DESTRUCTIVE POWER OF STRONG GROUND MOTIONS TO ESTIMATE BUILDING DAMAGE, The 6th IASPEI / IAEE International Symposium: Effects of Surface Geology on Seismic Motion, August 2021.

Shunsuke NAKAZAWA and Yuki SAKAI, Improvement of Fragility Curves by Classifying Building Category, The 17th World Conference on Earthquake Engineering, 6a-0014, 2020.9.

Masashi SHIOMITSU, Yuki SAKAI, Hiroshi ISODA, Yasuhiro ARAKI,A Wooden Houses Cluster Model Considering the Behavior of Shear Walls for Earthquake Damage Estimation, The 17th World Conference on Earthquake Engineering, 2k-0059, 2020.9.

Nakamura, Y., Sakai, Y. and Kato, D., Investigation on Destructive Power Indices of Strong Motions Using Building Damage Data and Strong Motions Recorded in the 2004 Niigata-Chuetsu, Japan, Earthquake, Proceedings of the 8th National Conference on Earthquake Engineering, 2006.4.

Noriko Tokui, Yoshiaki Nakano, Yasushi Sanada, Yuki Sakai, Haruhiko Suwada, and Hiroshi Fukuyama, Development of Simplified Test Method with HPFRCC Scaled Models, Proc. of the 1st Itrnl Conference on AESE, 498-496, 2005.7.

Tokui, N., Sakai, Y., Sanada, Y., Yamauchi, N., Nakano, Y., Suwada, H. and Fukuyama, H., Simplified Shaking Table Test Methodology Using Extremely Small Scaled Models, Proceedings of the 13th World Conference on Earthquake Engineering, 2004.

Sanada, Y., Tokui, N., Sakai, Y., Nakano, Y., Suwada and Fukuyama, H.,Extremely Small Scaled Models for Simulating Responses of RC Members, Japan-Europe Seismic Risk Workshop, University of Bristol, July 2004.

Umemura, H., Sakai, Y. and Minami, T., Estimation of Response of Structures Under Near-Field Ground Motions Considering Inhomogeneous Faulting, Proceedings of the 12th World Conference on Earthquake Engineering, 2000.

Sakai, Y., Damageability of Strong Ground Motions, Japan-Slovenia Workshop on Performance Based Seismic Design Methodologies, 2000.

Sakai, Y., Minami, T. and Kabeyasawa, T., Simplification of Strong Ground Motions for Loading in Performance-Based Seismic Design, U.S.-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, Pacific Earthquake Engineering Research Center, PEER 1999/10, 235-244, 1999.

Sakai, Y. and Minami, T., Destructive Power of Strong Ground Motions with High Level Ground Acceleration, Proceedings of the Eleventh World Conference on Earthquake Engineering, 1996.

Minami, T. and Sakai, Y., Extremely Large Potential Destructiveness of the Ground Motions Measured in the 1995 Kobe Earthquake in Japan, Proceedings of the Eleventh World Conference on Earthquake Engineering, 1996.

Sakai, Y., Two Questions in Performance Based Earthquake Resistant Design, Japan-U.S. Workshop on Seismic Building Code, 1995.

Sakai, Y. and Aoyama, H., Design Requirements for Ductile R/C Frame Structures, Proceedings of the Tenth World Conference on Earthquake Engineering, Vol. 8, 4349-4354, 1992.

Sakai, Y., Backgrounds of Design Limit Deformation and Design Assurance Deformation, The U.S.-Japan Joint Technical Coordinating Committee on Precast Seismic Structural Systems, 1992.

Sakai, Y., Otani, S. and Aoyama, H., Ductility of Reinforced Concrete Columns Using High-Strength Concrete Under Flexural Compression, Pacific Conference on Earthquake Engineering, Proceedings, Volume 1, 171-182, 1991.

Sakai, Y., Ductility of Reinforced Concrete Columns Using High-Strength Concrete Under Flexural Compression, International Workshop on High-Strength-Concrete, 1991.

上のページへ